How to prevent the CNC machining center from shaking the knife? Just remember these three points
Many customers choose CNC machining centers to process parts,mainly because the precision of CNC machining centers is relatively high,and the post-work that needs to be processed is much reduced.However,when the tolerances required by customers are getting stricter and the surface roughness requirements are getting higher and higher,many CNC machining centers produce finished products that are not satisfactory.This is mainly because the vibration knife problem has occurred.How to prevent the CNC machining center from damaging the knife?Just remember these three points.
1.When there is no special requirement for exposure,the workpiece is placed in the middle and the exposed at both ends is as small as possible.
2.In the case of meeting the processing requirements,the shorter the knife,the better.Also remember that the master has said that you should not clip the blade!!!
3.With a more modern tool path without worrying about breaking the knife,the tool will last longer.
It is not difficult to solve the vibration knife problem in the machining center.Remember the above points.The problem of the vibration knife in the CNC machining center is solved,and the quality of the machined parts will be correspondingly improved.There is no need to worry about the problem that the precision of the workpiece is not high enough.