How to ensure that CNC processing equipment can work normally?
Although the CNC machining lathe is put into production,it has been used all the time.However,I believe that all kinds of machine tools are covered with some dust,so the first thing to do is to clean.If you want to use the machine well,you can't clean it.How to ensure that CNC processing equipment can work normally?
Before turning on the machine,you must check the power supply voltage of the machine.Be sure to turn on the power switch of the machine after the power switch is turned on for about 10 minutes,and then turn on the other power switches in the power box.
Do not perform the machining operation immediately when the machine starts.Firstly,pre-heat the three axes and the spindle of the machine,and start the spindle running for more than half an hour.Check the hydraulic system oil level,tool coolant level,and check the compressed air filter for water or oil after the machine is turned on.
Although some of the cumbersome and complicated,but after the above steps and then boot,I believe that no matter for the machine tool or the operator,it has better security,but also can ensure that the CNC machining lathe has been safe and stable.