What are the environmental requirements for CNC machining CNC lathes?
CNC machining CNC lathes are produced with high-precision machining parts,such as large-scale high-power equipment such as CNC lathes.In order to ensure the normal operation of CNC lathes,what kind of environment should be prevented?The power supply voltage fluctuation at the position where the machine is located is small,the ambient temperature is lower than 30 degrees,and the relative temperature is less than 80%.
1.Guarantee the voltage of CNC lathes.Although our country's residential electricity and industrial electricity are different power grids,in daily work,the voltage of industrial power grids is also unstable and often unstable,so that for our CNC lathes The damage is very big,it is recommended that everyone do a good job of voltage regulation.
2.Environmental requirements The position of the machine tool should be kept away from the vibration source.The direct sunlight and heat radiation should be avoided to avoid the influence of moisture and air flow.If there is a vibration source near the machine tool,anti-vibration grooves should be placed around the machine.Otherwise,it will directly affect the machining accuracy and stability of the machine tool,which will make the electronic components contact poorly,cause malfunction,and affect the reliability of the machine tool.
3,power requirements General CNC lathe installed in the machine shop,not only the environmental temperature changes,the use of poor conditions,and a variety of mechanical and electrical equipment,resulting in large fluctuations in the power grid.Therefore,the location of the CNC lathe requires strict control of the power supply voltage.Power supply voltage fluctuations must be within the allowable range and remain relatively stable.Otherwise it will affect the normal operation of the CNC system.
4.Temperature conditions The ambient temperature of the CNC lathe is lower than 30 degrees,and the relative temperature is less than 80%.Generally,the numerical control electric control box is internally provided with an exhaust fan or a cooling fan to keep the electronic components,especially the central processing temperature constant or the temperature difference is small.Excessive temperature and humidity will result in reduced life of the control system components and lead to increased failure.Increased temperature and humidity,increased dust can cause bonding on the integrated circuit board and cause short circuits.
5.Standardize the use of machine tools.When using the machine tool,it is not allowed to arbitrarily change the parameters set by the manufacturer in the control system.The setting of these parameters is directly related to the dynamic characteristics of the various parts of the machine.Only the value of the gap compensation parameter can be adjusted according to the actual situation.The user cannot change the machine attachment at will,such as using a hydraulic chuck that exceeds the specifications.
The above is some of the environmental requirements of CNC machining CNC lathes,but some common precautions.To ensure the normal operation of CNC lathes,we must pay attention to the above points.In addition,we must pay attention to the maintenance and maintenance of CNC lathes.