Horizontal machining centers and CNC lathes are all a way for us to process workpieces.The two are the same and different.The horizontal CNC machining center can automatically select different tools according to the program after the workpiece is clamped at one time,automatically change the rotation speed of the spindle,and complete the processing of multiple processes on multiple surfaces in sequence.The machining center is most suitable for the processing box.Body parts.
1.Installation of horizontal CNC machining center environment
Horizontal CNC machining centers should be installed away from sources,away from direct sunlight,without heat radiation and without moisture.If there is a source near the place where the horizontal CNC machining center is installed,a shockproof groove should be placed around the horizontal CNC machining center.If the anti-shock is not provided,it will directly affect the machining accuracy and stability of the horizontal CNC machining center.Over time,it will affect the poor contact of the electronic components and cause failure,which will affect the reliability of the horizontal CNC machining center.
2.Strict control of voltage and current
Horizontal CNC machining centers are generally installed in the processing workshop,and there are many mechanical equipments in the processing workshop,which inevitably leads to large fluctuations in the power grid.Therefore,the position of the horizontal CNC machining center must be strictly controlled to control the voltage and current of the power supply.It is necessary to control the voltage and current of the power supply within the allowable range of the horizontal CNC machining center.It is necessary to keep the voltage and current of the power supply stable,otherwise it will be directly Affect the normal operation of horizontal CNC machining centers.
3,temperature and humidity will directly affect the horizontal CNC machining center
Horizontal CNC machining centers are generally required to operate in an environment below 30 degrees Celsius.Generally,exhaust fans and air coolers are installed in the distribution box of the horizontal CNC machining center to ensure that the electronic components and central processing are at a constant temperature.Work under.If the temperature and humidity are too high,the component life of the control system will be reduced,resulting in an increase in the failure of the horizontal CNC machining center.When the humidity is increased,the dust will increase on the integrated circuit board and directly lead to failure of contact and short circuit.
4,machine tool factory parameter settings
When using the horizontal CNC machining center,the customer can't change the factory parameter setting of the machine tool at will,because these factory parameter settings are directly related to the dynamic characteristics of each part of the horizontal CNC machining center.Only the gap compensation parameter value can be set according to the actual situation.If you want to change the factory setting parameters,please contact the manufacturer and change the factory parameter settings under the guidance of the manufacturer's technician.