How to ensure the daily work of CNC machining CNC lathe?
The normal operation of CNC machining CNC lathes is guaranteed by routine maintenance.The maintenance of CNC lathes is not as simple as what we call scrubbing.It requires maintenance personnel to have knowledge of machinery,processing technology and hydraulics,as well as knowledge of electronic computers,automatic control,drive and measurement technology.What are the daily maintenance tasks?
1.Choose the right environment to use.The operating environment of the CNC lathe,such as temperature,humidity,vibration,power supply voltage,frequency and interference,will affect the normal operation of the machine tool.Therefore,the installation conditions and requirements specified in the machine tool specification should be strictly implemented when installing the machine tool.In the case of economic conditions,CNC lathes should be installed separately from ordinary machining equipment for easy maintenance and repair.
2.Specialized personnel should be equipped with CNC system programming,operation and maintenance for CNC lathes.These personnel should be familiar with the mechanical,numerical control system,high-voltage equipment,hydraulic pressure,air pressure and other characteristics of the machine tool used,the use environment,processing conditions,etc.,and can correctly use the CNC lathe according to the requirements of the machine tool and system manual.
3.Clean up in time.Such as the cleaning of air filters,electrical cabinets,cleaning of printed circuit boards.
4.Inspection of the machine cable,mainly check the moving joint of the cable,whether there is contact failure,disconnection and short circuit at the corner.
5.Some of the numerical control system's parameter memory uses CMOS components,and the storage contents are maintained by battery power when the power is turned off.When a low voltage alarm occurs,the battery must be replaced in time,and must be carried out while the control system is powered on.Otherwise,the storage parameters will be lost,resulting in the CNC system not working.
6,long-term maintenance of CNC lathes.When the CNC lathe is idle,the CNC system should be energized frequently,and it will run empty when the machine is locked.In the rainy season with high air humidity,it should be energized every day,using the electrical components themselves to drive away the moisture in the CNC cabinet to ensure the stable and reliable performance of electronic components.
Comprehensive understanding,master CNC lathes,and timely maintenance work,in order to ensure the work of our CNC lathes.