What should I do if there is a scratch on the CNC workpiece?
There are scratches on the CNC workpieces,and the quality of the products is not up to the requirements.This is a very troublesome problem.It may be caused by the failure of our machine itself,or it may be caused by us.The problem of a single workpiece is not a big problem,but when there is a problem with a batch of products,it is a big loss.What should we do in the face of such problems?
1.Check the parameter settings and see if the CNC machining parameters can be changed.It may be that the setting of the CNC machining center parameters is unreasonable.
2,check the process used in processing parts,CNC machining center to avoid scratches is an effective way to use the pupil instead of drilling,the process selection is wrong.
3,first of all to see the CNC machining center processing map to know,if the thickness of the workpiece processed by the CNC machining center is not very thick,you can use a reamer to twist.
4.Check the water discharge speed and water volume of the coolant.Because the water output of your coolant in the CNC processing is slow and the water volume is not enough,the chips can not be discharged,which may cause problems.
5,CNC machining bit angle grinding point,and your drilling speed is too high.
The above is our solution when there is a problem with CNC machining parts.To solve these situations,we can guarantee the quality of our products.