In recent years,machining centers have become the most common and widely used processing tools in our manufacturing industry.Some parts and components are used in processing.What are the advantages of machining centers?
First,the structure of the machining center is simple and easy to understand,so the workpiece is very easy to clamp.You can use the same fixture,such as:pliers,pressure plate,indexing head,rotary table and other fixtures to clamp the workpiece,the workpiece Clip positioning and repeat positioning are convenient.
Second,after the workpiece is clamped once on the machining center,the digital control system can control the machine tool to automatically select and replace the tool according to different processes,and automatically change the spindle speed,feed rate and tool movement trajectory of the workpiece and other auxiliary functions.,in turn,complete the processing of multiple processes on several sides of the workpiece.And there are a variety of tool change or knife selection functions,which greatly improve production efficiency.
Third,due to the concentration of the process and the automatic tool change,the machining center reduces the time for clamping,measuring and machine adjustment of the workpiece,so that the cutting time of the machine tool reaches about 80%of the machine start time,and also reduces the between the processes.Workpiece turnover,handling and storage time shortens the production cycle and has obvious economic effects.The machining center is suitable for small and medium-sized batch production with complex parts,high precision requirements and frequent product replacement.
Fourth,because the structure of the vertical machining center is simple and easy to understand,it is very easy to clamp the workpiece.You can use the same fixture,such as:pliers,pressure plate,indexing head,rotary table and other fixtures to clamp the workpiece.The workpiece is positioned and repositioned conveniently.When machining a flat workpiece,chip removal is easy,and the generated chips are washed away by the sprayed coolant,thereby avoiding scratches on the surface of the workpiece during cutting.
The above is the advantage of the machining center,which not only improves our production efficiency,but also improves the quality of the processed parts.